Technology, computers, i phone elektricity, elektronics blog
It is a blog about the latest technology, electronic and yhe newest.

owen h asked:


Searching for the best value for a budget of $600 for an electric heater. Im seeing some at Cosco that have this LED technology and havnt seen it before. Anyone have experience with this? Thanks a lot.

Andrew asked:


Technology had become an integral part of our daily living. Technological activities, social organizations, and apparatuses provide several opportunities for cultural and economic development. Technology decrease production price, saves efforts and time, and gives a compulsory push for cultural growth. Further than that, technological influence is often impulsive, which sometimes may have disastrous effects. Catastrophe in Chernobyl nuclear power plant of 1986, actions of September 11, explosions of nuclear power in Hiroshima and Nagasaki are only some of the most well-known outcomes of technological innovation. Technology still is the most mighty tool and if a wrong person uses it, either unintentionally or intentionally, it can damage even millions of citizens.

This article has a goal to find out pros and cons of scientific innovation. The influence of the three major technology categories – technological activities, social organization, and apparatuses, has to be discussed comparing both costs and benefits on the two most important spheres of individual’s life – cultural and economic. Possibly, the question that bothers everybody most of all is whether it is possible to control technological. In case if it can be predicted and controlled with sufficient accuracy, unpleasant consequences can be eliminated. Known technological innovation is impartial; the ways of exclusion of adverse outcomes of technological innovation has to be discussed as well, which usually proves that technical benefits overshadow the costs.

The very few sections in culture which are extremely influenced by scientific change are transportation, food production, communication processes, warfare. After examining the issue to the very origins, one can end up with thought that culture is a creation of technological activities. Painting, printing, customs and traditions result from the capacity of a human to apply and reason technological actions that make the production processes easier. Cultural and technology development are the two integral parts of a sole unit. Following the skill to reason and the need to survive, civilization discovers technological processes which in future stimulates rational development and gives chances for self expression

soccerforlife366 asked:

Please comment and rate.

Umair6 asked:

Kept Secret but finally Shown what is Microsoft is up To!
Enjoy!

Jeffrey Edwards asked:


If we look over the last century and examine the rate of technological growth. We can forgive ourselves for feeling a little proud about how quickly things have moved forward compared to the previous centuries. Flying at speed. Moving underwater stealthily. Travelling in space to name a fraction of what the human race has achieved in such a short span of time.

The big question though, is could we have progressed any faster and further in that space of time? The answer to that question is a big resounding YES!

Since we have been civilised enough to be able to maintain a system of currency, we have had to rely on that very method of exchange, and commerce has taken full advantage of this situation. In fact, commerce has become so powerful that it actually controls the rate at which we progress.

There are currently three levels of technology in existence.

1) Commercial Technology.

This is the technology we use in everyday life. Covering all manner of toys, tools and useful objects. However, the level at which commercial technology is at. Is higher than that used in commercially available products. Now we could argue that the technology they hold back, is not fully tested, and therefore not completely safe. This might be true in very small percentages. The major reason for holding back is good old money. It’s all about making as much money out of a particular product before they move on to the next one. How many times have you seen products advertised as cutting edge at cut price? Only to find that they are outdated months later. Hard selling of latest technology at low prices is a key indicator that commerce is about to release a technologically superior product. So perhaps you can now see the control. What would happen to our technology if this didn’t happen?

2) Military Technology.

This is more advanced than commercial technology. There’s a lot of military technology we know about, and a lot we don’t know about. Governments will hold back the release of this technology into the commercial arena, because it can give them a tactical advantage in a military sense. The components used in military hardware will generally have a longer life than those used in commercial products. I remember having a component catalogue in the 1980’s. I could buy standard or military components. Standard were guaranteed for 1 year. Military for 5 years. They are generally more expensive. Commerce avoids using these products. The excuse is cost but it’s more likely to be because they want to sell you products at regular intervals. Having a product that lasted for a long time would be counter productive to them.

3) Experimental Technology.

This area is way ahead of commercial technology, but is closely watched by the military. There are developments currently in progress which are things that you possibly, couldn’t even comprehend, or didn’t even think was in the realm of possibility. The deepest and most secret of these are run by government bodies, and some of them, apparently, don’t exist. Again, this is for tactical reasons. If you could see what they were cooking up you would be amazed in one sense, and possibly frightened out of your skin.

So there we have it. After taking all these points into consideration, it’s quite obvious to see that progress is thwarted by these processes. Well, let’s see what the next few decades bring. Don’t worry though. Most of it is already here.

Michael Hehn asked:


It seems like every couple of years there are new advances made and our technology springs forward. Sometimes it can be difficult to keep up with all of the incredibly fast paced advances made. Currently, blue ray technology has been brought into the mainstream and learning what this technology is can keep consumers up to date with the latest inventions in home entertainment.

Discovering What Is Blue Ray Technology

For many, home movies were originally played on the classic vcr tape. Then, the technology moved onto DVD players, and the look of the movies was sharper and of a much better quality. Now the next evolution has started with blue ray technology.

Finding out about what it is includes learning about the differences between this kind of technology and the current mass marketed DVD systems. This new kind of technology has been developing for years, since the mid 1990’s when HDTV’s were becoming more common for consumers to buy. A technology was needed that could record and play back the high definition recordings. Blue Ray technology was created to fill that void.

So what is so special with this technology and how is it different from the standard DVD? BR technology can store far more information that the traditional DVD, almost 5 times more storage is available on a blue ray disc. The blue ray discs use a blue ray laser to read the information where other DVD’s use a red laser.

With a blue laser the wave length is shorter allowing for more storage to be used. This did cause some problems originally, as the discs were much easier to scratch. The case that held the disc had to be made more durable and was somewhat bulky. Advances in polymer coatings have advanced allowing for a better protective coating to be placed on the disc, alleviating the need for the bigger containers.

There are many companies that have a stake in the development of the next cutting edge technology and these companies are looking into both blue ray technology and a HD DVD. Some of the big companies are fighting over which technology should be used and this has caused a split in which companies support which format. Even companies that produce movies are split over which type of technology to use, which means depending on what movie a consumer wishes to purchase; they may need two different types of players.

Both the blue ray and the hddvd players are continuing to improve. In the end, consumers may discover that they enjoy both types of players and they both may be successful with consumers. Learning about what is this technology exactly can help a consumer get a good idea of basic information in regards to this new technology.

Alec Alpert asked:


Modern hospitals depend heavily on medical technology to diagnose, treat and prevent diseases. A typical mid-sized hospital has hundreds of items of medical equipment, from simple stethoscopes and blood pressure monitors to highly sophisticated MRI machines and linear accelerators. Hospitals are complex enterprises with entire departments dedicated to technology planning, assessment, acquisition, maintenance, upgrade and replacement at the end of the product life cycle. They have elaborate systems, programs, policies, procedures and protocols in place for purchasing new medical equipment.

To sell successfully to healthcare providers, marketing and sales professionals have to be well versed in the buying processes that healthcare providers use. Medical device marketing is quite different from any other marketing. Typically, hospitals have a review process to qualitatively and quantitatively evaluate their medical technology needs. The review’s scope depends on the cost of the technology, and may involve many departments. For expensive equipment, the review most likely will be elaborate. For less expensive and disposable items, the review may simply assess the department’s current needs, and the proposed purchase’s operational and financial impacts. In either case, a market survey and literature search take place to some extent, and this is supplemented with extensive data collection and analysis when needed. This is why white papers and case studies published by medical device manufacturers are very useful during the review process - the decision-makers look for every bit of information they can find. Hence, white papers and case studies can significantly influence the decision-making process. A typical review process includes the following phases:

1. Strategic planning 2. Assessment 3. Acquisition 4. Utilization 5. Repair and maintenance 6. Replacement and disposal

The process starts with strategic planning. In this top-level phase, the relevant stakeholders (e.g., Directors, Professors, Managers, Doctors, Engineers, Purchasing, etc.) review key issues, success factors and resource allocation, and assign responsibilities for sustained improvement in technological performance. They identify the services their facility provides, and the technologies that would complement their existing services. The typical questions to answer are: Where are we? Where do we want to be? How are we going to get there?

Because medical technology greatly impacts the cost and structure of healthcare delivery, hospitals include technology assessment in their planning process, which typically includes cost-benefit and cost-effectiveness analyses.

Cost-benefit analysis calculates the costs of applying the technology and compares them to the benefits resulting from its application. It provides criteria upon which to base decisions of whether to adopt or reject a proposed device. The device is adopted if its benefits exceed its costs. However, one limitation of this analysis is that it expresses all benefits, including therapeutic effects, in monetary terms. Hence, hospitals also conduct cost-effectiveness analyses to quantify therapeutic effects in terms of reduced patient hospital stays, and compare these to the costs of the technology’s implementation. Although at first glance the chosen technology may seem to have limited impact on other facility operations, stakeholders also examine the likely effect of the new equipment on existing services.

Other aspects of cost-effectiveness analysis include assessment of long-term replacement strategies and identification of emerging technologies. Since medical devices have finite longevity, hospitals have replacement plans to minimize the effects of unforeseen capital replacement. By identifying emerging technologies that fit into the projected plans of the hospital’s service area, the hospital tries to avoid investing in nearly obsolete technologies.

Purchase of a new technology is justified only when an increase in equipment’s cost-effectiveness is clearly demonstrated. The typical questions asked during the analysis are:

* Will the new medical device increase the volume of the service? * Will it raise the costs of the service? * Will the device generate additional revenues and, if so, how much? * What is the new device’s expected lifespan? * What is the device’s reliability and the costs associated with its repair and maintenance? * How reliable and reputable is the manufacturer? * What impact will the new device have on routine operating costs? * What will the disposal cost be? * How easy is the device to operate?

Once the technology has been assessed and the decision to purchase has been made, the next phase in the process is technology acquisition, which typically includes the following steps:

* Preparation of general and functional specifications * Clinical, technical and cost evaluations * Review of proposals and evaluations, and making a final decision on a device manufacturer * Contract negotiation for the device’s acquisition * Preparation and issuance of a purchase order * Contract award

A contract award is the green light for the medical device company to deliver and install the product.

Thomas Pretty asked:


The importance of technology cannot be underestimated; the technological industries are probably the fastest moving in the world following news stories is vital because technology can cover all manner of industries and hence news stories vary greatly in subject matter.

In today’s high tech world it is unsurprising that so many areas of commerce and life depend upon technology and subsequently, any news in these fields is of vital importance to even the lay reader. Technology news is so important that many news websites have created dedicated pages purely to report on technological developments.

Naturally industries such as computing and video gaming are heavily interested in the developments reported as part of technology news stories. In computing new processor chips as well as other developments are always followed closely to assess the power of future computers. The same can be said for the video games industry that constantly uses technology news stories to keep an eye on what competitors are doing.

Not only can news in this industry contain technological developments but sales figures and levels of worldwide sales of consoles or games. Another essential element of news in the gaming industry is to see which games are being banned and heavily policed by regulators as this can help developers gain a good idea of where the boundaries lay in game development.

There are industries that rely on the technology news pages that may surprise some people; the medical industry relies heavily on technical developments to advance forms of diagnosis and treatment. A recent story on students using consoles to increase their dexterity before surgery was a news article that provided a unique insight into the medical world.

Surprisingly sports are becoming increasingly reliant upon technology to increase their efficiency and skill levels; in cricket it is believed that some players where GPS systems that reveal the amount of running a specific player does during a match and hence alter his training scheme accordingly.

The importance of technology in communications is probably where news is most important. As one of the fastest developing industries in the world, communications has the potential to change our lives unimaginably. Already the mobile phone has revolutionised the way we live and communicate and hence many want to be well informed when a new technology arrives. Next generation phones with full mobile internet as well as GPS navigation systems are at the forefront of the mobile phone industry meaning enthusiasts as well as industry commentators are glued to news stories as they role off the presses.

Other developments reported in the technology news pages include information on the interfaces we use to interact with our various pieces of technology. Recent stories have included reports of headsets that allow users to control game characters through emotions and facial expressions as well as the ability to move items cognitively in a virtual world. Outside of the gaming sphere the rumours of a ‘3D internet’ are rife as increasing progress is made in the way we interact with technology.

Developments include ways in which technology may change our home lives. With news stories reporting of fridges that can automatically order food as it runs out, self cleaning ovens and vacuum cleaners that will clean the house without the lifting of the finger. If you believe all the news stories have to say, in the future we will be living in a world without manual labour.

Everyone should have a passing interest in technological developments as eventually they may change everyone’s lives for the better. Granted some of the technology news stories can be too detailed for the lay reader to enjoy but if the stories are written from a general interest perspective, all should be entertained and educated about technology that may one day change the world.

lchcsince1975 asked:


what if there was a projection dome theatre similar to the one used on soarin over california at disneys california adventure that put you into the stadium of your favorite team or any major sporting event for that matter that you would otherwise be unable to attend because of geographic location or price of tickets? Do you think technology could make the experience authentic enough and would you be interested in it if it could?

marxist asked:


Need to know inappropriate and appropropriate technology, technological obsolescence technology choice and selection mechanisms in relation to Africa.Dont restrict to information technology but to technology in general.This is a Development studies question